How to hack IP cameras through RTSP protocol using brute forcing

[skytower]

Hello, so basically in this thread I am gonna show you how break in to ip cams, brute forcing the rtsp protocol. Lets talk about what is RTSP
 

RTSP is a protocol used really common on ip cams, to be able to connect them and watch the content, for example, you can use VLC and add a rtsp route from a ip cam, and watch the videos saved from it.
This protocol, most of the time, is used on the port 554, so we will brute force it to try to get the credentials.
This is most effective than do it on the web configuration page, because this one, most of the time, have a login attemps limitation, and the RTSP one not.

Also, the rtsp and web configuration login, uses same credentials, so, if the rtsp credentials are admin:admin on the login of the web configuration, will be the same admin:admin

TSP routes
Very important thing here, to connect to the rtsp of a ip cameras, you also have to specify the route of the login, for example, 127.8.6.3/steam1
So you have also to brute force the routues, so then you are able to use the credentials to login. But dont worry, this is really easy, with a tool that I am gonna show you, you gonna do it all automatically
INSTALLING RTSPBRUTE
First of all, lets start installing the tool, called rtspbrute from: https:// pypi. org/project/rtspbrute/
You have to run this command: pip install rtspbrute on your console
Also, these requirements:

[ Hidden Content! ]

You must register or login to view this content.

 

Enjoy, the article is intended for educational purposes or authorized use only

 

Likes 💓 +Reps are always appreciated and will motivate me to do more of these

[pippo0909]

ok broooo

[johnnysins67]

will check this out thanks

[dakudama]

26-08-2025, 04:33 PM skytower Wrote:

[font]Merhaba, bu başlıkta size IP kameralara nasıl girileceğini, RTSP protokolüne nasıl kaba kuvvet uygulanacağını göstereceğim. [/font][font]RTSP'nin ne olduğundan bahsedelim.[/font]
 

[font]RTSP, IP kameralara bağlanıp içerik izlemek için oldukça yaygın kullanılan bir protokoldür. Örneğin, VLC kullanarak bir IP kameradan RTSP rotası ekleyebilir ve kaydedilen videoları izleyebilirsiniz. [/font]
[font]Bu protokol genellikle 554 numaralı portta kullanılır, bu yüzden kimlik bilgilerini almak için kaba kuvvet kullanırız. [/font]
[font]Bu, web yapılandırma sayfasında yapmaktan daha etkilidir, çünkü bunda çoğu zaman oturum açma girişimi sınırlaması vardır, ancak RTSP'de yoktur.[/font]

[font]Ayrıca, rtsp ve web yapılandırması oturum açma aynı kimlik bilgilerini kullanır, bu nedenle, web yapılandırmasının oturum açmasında rtsp kimlik bilgileri admin:admin ise, aynı admin:admin [/font]

[font]TSP rotaları olacaktır [/font]
[font]. Burada çok önemli olan şey, bir IP kamerasının rtsp'sine bağlanmak için, oturum açma rotasını da belirtmeniz gerekir, örneğin, 127.8.6.3/steam1. [/font]
[font]Ayrıca rotaları zorla da kırmalısınız, böylece oturum açmak için kimlik bilgilerini kullanabilirsiniz. Ama endişelenmeyin, bu gerçekten kolay, size göstereceğim bir araçla, her şeyi otomatik olarak yapacaksınız [/font]
[font]RTSPBRUTE'U YÜKLEME [/font]
[font]Öncelikle, rtspbrute adlı aracı şu adresten yüklemeye başlayalım: https://pypi.org/project/rtspbrute/ [/font]
[font]Konsolunuzda şu komutu çalıştırmanız gerekiyor: pip install rtspbrute [/font]
[font]Ayrıca, bu gereksinimler:[/font]

 

[font]Keyfini çıkarın, makale yalnızca eğitim amaçlı veya yetkili kullanım içindir[/font]

 

[font]Beğeniler 💓 +Tekrarlar her zaman takdir edilir ve beni daha fazlasını yapmaya motive eder[/font]

[font]sdfsdgfass[/font]

[Had]

26-08-2025, 04:33 PM skytower Wrote:

Hello, so basically in this thread I am gonna show you how break in to ip cams, brute forcing the rtsp protocol. Lets talk about what is RTSP
 

RTSP is a protocol used really common on ip cams, to be able to connect them and watch the content, for example, you can use VLC and add a rtsp route from a ip cam, and watch the videos saved from it.
This protocol, most of the time, is used on the port 554, so we will brute force it to try to get the credentials.
This is most effective than do it on the web configuration page, because this one, most of the time, have a login attemps limitation, and the RTSP one not.

Also, the rtsp and web configuration login, uses same credentials, so, if the rtsp credentials are admin:admin on the login of the web configuration, will be the same admin:admin

TSP routes
Very important thing here, to connect to the rtsp of a ip cameras, you also have to specify the route of the login, for example, 127.8.6.3/steam1
So you have also to brute force the routues, so then you are able to use the credentials to login. But dont worry, this is really easy, with a tool that I am gonna show you, you gonna do it all automatically
INSTALLING RTSPBRUTE
First of all, lets start installing the tool, called rtspbrute from: https:// pypi. org/project/rtspbrute/
You have to run this command: pip install rtspbrute on your console
Also, these requirements:

 

Enjoy, the article is intended for educational purposes or authorized use only

 

Likes 💓 +Reps are always appreciated and will motivate me to do more of these

loove ipoasd

[uaybnx73]

26-08-2025, 04:33 PM skytower Wrote:

Hello, so basically in this thread I am gonna show you how break in to ip cams, brute forcing the rtsp protocol. Lets talk about what is RTSP
 

RTSP is a protocol used really common on ip cams, to be able to connect them and watch the content, for example, you can use VLC and add a rtsp route from a ip cam, and watch the videos saved from it.
This protocol, most of the time, is used on the port 554, so we will brute force it to try to get the credentials.
This is most effective than do it on the web configuration page, because this one, most of the time, have a login attemps limitation, and the RTSP one not.

Also, the rtsp and web configuration login, uses same credentials, so, if the rtsp credentials are admin:admin on the login of the web configuration, will be the same admin:admin

TSP routes
Very important thing here, to connect to the rtsp of a ip cameras, you also have to specify the route of the login, for example, 127.8.6.3/steam1
So you have also to brute force the routues, so then you are able to use the credentials to login. But dont worry, this is really easy, with a tool that I am gonna show you, you gonna do it all automatically
INSTALLING RTSPBRUTE
First of all, lets start installing the tool, called rtspbrute from: https:// pypi. org/project/rtspbrute/
You have to run this command: pip install rtspbrute on your console
Also, these requirements:

 

Enjoy, the article is intended for educational purposes or authorized use only

 

Likes 💓 +Reps are always appreciated and will motivate me to do more of these

loveeeeeeeeeeeeeeeeeeeeeeeeeee tnxxxxxxxxxxxxxxxxxx

[oowb]

5656576767

[oowb]

74100147410

[wikec15656]

Will check that later